Oregon Chainsaw Chain Cross-Reference
How to choose
Match the pitch, gauge and drive-link count stamped on your guide bar before ordering. Bar length or saw model alone is not enough; one model may use different bar and chain configurations.
- Read pitch, gauge and drive links on the guide bar or its manual.
- Match all three values in the table; confirm the installed bar configuration.
- Choose the pack quantity shown on the product listing.
- If any value is missing, confirm it before adding a chain to your cart.
| Product | Length | Pitch | Gauge | DL | Oregon Article # | Pack | Price | Actions | |
|---|---|---|---|---|---|---|---|---|---|
 |
Chain 18 Inch .325" .063" 68DL 1 Pack |
18.0"
|
.325" | .063" | 68 DL | 22LPX068G | 1 pc | $28.99 | |
 |
Chain 14 Inch 3/8"LP .050" 52DL 3 Pack |
14.0"
|
3/8" LP | .050" | 52 DL | 91PX052G | 3 pcs | $21.99 | |
 |
Chain 16 Inch 3/8"LP .043" 56DL 3 Pack |
16.0"
|
3/8" LP | .043" | 56 DL | 90PX056G | 3 pcs | $23.99 | |
 |
Chain 16 Inch 3/8"LP .043" 55DL 3 Pack |
16.0"
|
3/8" LP | .043" | 55 DL | 90PX055G | 3 pcs | $21.99 | |
 |
Chain 20 Inch .325" .063" 81DL 3 Pack |
20.0"
|
.325" | .063" | 81 DL | 22LPX081G | 3 pcs | $33.99 | |
 |
Chain 20 Inch 3/8" .050" 72DL 3 Pack |
20.0"
|
3/8" | .050" | 72 DL | 72LPX072 | 3 pcs | $32.99 | |
 |
Chain 18 Inch 3/8"LP .050" 62DL 3 Pack |
18.0"
|
3/8" LP | .050" | 62 DL | 91PX062G | 3 pcs | $23.99 | |
 |
Chain 10 Inch 3/8"LP .050" 40DL 3 Pack |
10.0"
|
3/8" LP | .050" | 40 DL | 91PX040G | 3 pcs | $17.99 | |
 |
Chain 8 Inch 3/8"LP .050" 33DL 3 Pack |
8.0"
|
3/8" LP | .050" | 33 DL | 91PX033G | 3 pcs | $14.99 | |
 |
Chain 16 Inch 3/8"LP .050" 56DL 3 Pack |
16.0"
|
3/8" LP | .050" | 56 DL | 91PX056G | 3 pcs | $23.99 | |
 |
Chain 12 Inch 3/8"LP .043" 45DL 3 Pack |
12.0"
|
3/8" LP | .043" | 45 DL | 90PX045G | 3 pcs | $19.99 | |
 |
Chain 20 Inch 3/8" .050" 72DL 1 Pack |
20.0"
|
3/8" | .050" | 72 DL | 72LPX072 | 1 pc | $11.99 |
Questions before ordering
Can I choose a chain by saw model alone?
No. Use the brand/model table as a starting point, then match the pitch, gauge and drive-link count on your installed guide bar.
Does bar length guarantee the right fit?
No. Chains for the same nominal bar length can have different pitch, gauge or drive-link counts.
What does DL mean?
DL is the number of drive links. Count the links that run inside the bar groove and match the required total.
Is 3/8 LP the same as standard 3/8?
No. Treat low-profile 3/8 LP and standard 3/8 as distinct chain configurations; match the guide bar and sprocket specification.
How do I use the Oregon cross-reference?
Find the exact Oregon code, then confirm the ALBO listing has the same pitch, gauge and drive-link count before ordering.
What should I check before adding a pack to cart?
Confirm the technical parameters and the number of chains in the selected pack. The table shows the current price and available variant.
